home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Diamond Collection
/
The Diamond Collection (Software Vault)(Digital Impact).ISO
/
cdr05
/
cvt2.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1995-03-27
|
14KB
|
334 lines
README for CONVERT Version 2.0-a for Windows TM
CONTENTS OUTLINE
INTRODUCTION
SYSTEM REQUIREMENTS
SOFTWARE REQUIREMENTS
MEMORY REQUIREMENTS
OTHER REQUIREMENTS
FILES INCLUDED
INSTALLING CONVERT 2.0
TROUBLESHOOTING CONVERT 2.0
THE SHAREWARE CONCEPT
CUSTOMER SUPPORT
REGISTRATION
SHAREWARE LICENSE AGREEMENT
TRADEMARK ACKNOWLEDGEMENTS
******** INTRODUCTION ****************
CONVERT 2.0 for the Windows TM operating system is a program designed to make
your life a little easier. Now, you no longer have to dig out that book
with all those formulas and spend time looking up that particular
conversion factor that applies to your particular application. Most,
if not all, of your conversions can now be done in a fraction of the
time it takes to look them up in a book.
I had to fix a couple of minor bugs in the program so this is the 2.0-a version.
In Area Conversion - Entering value to be converted into Square Yards, Square Roods
was resulting 0.
Some of the Result numbers were too long for the result boxes. Redesigned most of
the Conversion Forms to accomodate more digits.
******** SYSTEM REQUIREMENTS *********
Microsoft Windows Version 3.1 or later running in 386 Enhanced Mode. CONVERT 2.0
will run with version 3.0, but the WinHelp.EXE version 3.0 will not support the
CVT.HLP file. Convert will not run if you are running windows in the Standard
Mode. Windows is running in Standard Mode if it was loaded using the /S switch.
386SX/DX, 486SX/DX.
At least 900 KBytes available on hard drive.
SOFTWARE REQUIREMENTS
If you have a previous version of Convert, it is NOT RECOMMENDED that you retain
these files. It is HIGHLY RECOMMENDED that you go to the directory where the
previous version of Convert resides and delete all the files before installing
Convert 2.0.
Also, if you had a previous version of Convert then go into the C:\WINDOWS
directory and delete the file "CONVERT.INI". When you run Convert 2.0 for the
first time, a new CONVERT.INI will be generated.
If you already have a copy of the THREED.VBX file on your C:\WINDOWS\SYSTEM
directory, then you can delete this file from the Convert directory. This will
save you 65K bytes of space on your hard drive. MAKE SURE that you have this
file on your system as Convert will not run without it.
The VBRUN300.DLL is REQUIRED to run Convert. This file can be found in any
number of places. I have not included the VBRUN300.DLL file in the CVT2.ZIP
because it increases the file size considerably, (almost 400K). On CompuServe
it can be found in the following forums:
MS BASIC Forum
MS WINFUN Forum
MS Windows Shareware Forum
or simply click on the "Find" button on WinCIM and then type VBRUN300. Many
BBS's also will have this file in their archives somewhere.
MEMORY REQUIREMENTS
At least 4 Meg of RAM. Program may generate an "Out of Memory" error. If
this happens, try to run CONVERT again. Windows should re-allocate the available
memory to run CONVERT. If not, see "Customer Support" in the file CVT.HLP.
Also, check your Windows - Control Panel - 386 Enhanced setting for swap-file
size. It is generally recommended to have a permanent swap file in your
system. See you Windows documentation for instructions on how to change the
Windows Swap File settings.
OTHER REQUIREMENTS
Although you can effectively run CONVERT without a Mouse, CONVERT was
written to optimally take full advantage if you have a Mouse. See the
help file for instructions.
Hercules Monochrome, CGA/EGA, VGA/SVGA.
NOTE: I have run Convert on a bare bones 286 with a Hercules Monochrome
monitor, 2 Meg RAM, Windows version 3.0 with vesion 3.1 WINHELP.EXE
with the following results:
1. The program took a long time to load.
2. The Windows graphics were cut off at the bottom.
Otherwise, the program seemed to run OK. If you experience other
problems, please let us know.
FILES INCLUDED:
CVT.EXE The main program
CVT.HLP Help file for Convert
README.TXT This File
STATUS.DLL Convert's status bar
THREED.VBX Various controls
The following files are used to provide the various graphics used in
the Convert program, DO NOT DELETE!:
CONV.BMP
CONVERT.BMP
No manual is included since the extensive Help file has all the
instructions necessary to run Convert.
This is a Shareware Product. You are authorized to freely use it for a
period not to exceed 30 days. You are then REQUIRED to register it.
See the Help file for registration procedures.
********** INSTALLING CONVERT 2.0 *************
1. Simply create a directory named whatever you want, it is suggested however,
that you create a directory named CONVERT.
2. Copy the files on this disk to your recently created directory.
3. Run CVT.EXE. The first time the program runs, you will be asked the directory
where the Convert 2.0 files are located. Just follow the instructions and you
will be up and running in no time.
******** TROUBLESHOOTING CONVERT 2.0 **********
Problem 1: "Unable to find file" When loading Convert 2.0
Cause 1: The program files were moved to a different directory or drive after
Convert 2.0 was initially installed and the setup was ran.
Solution: Go to the \Windows directory and delete the file "CONVERT.INI" then
run CVT.EXE again. The setup should prompt you for the directory where
Convert is to reside.
Cause 2: You have deleted one or more of the files that are distributed with
Convert 2.0.
Solution: Go to the directory where you want Convert 2.0 to reside and PKUnzip
the file CVT2.ZIP in that directory. Go to the \Windows directory and delete the
file CONVERT.INI. Run CVT.EXE and follow the setup instructions.
Cause 3: You do not have the file VBRUN300.DLL on your system.
Solution: See the SYSTEM REQUIREMENTS section elsewhere in this text for instructions
on where to obtain this file.
*****
Problem 2: "Out of Memory" When loading Convert 2.0
Cause 1: You might be running Windows in Standard Mode.
Solution: Exit Windows then re-start Windows WITHOUT the /S switch, i.e., C:>WIN
Cause 2: You might have several applications running that take up too much of the
memory resources on your machine.
Solution: Close some of the other applications and try to reload Convert 2.0.
Cause 3: There is not physically enough memory to run Convert 2.0.
Solution: You might try going into the Windows Control Panel, 386 Enhanced and
create a Permanent Swap File on your machine. See your Windows documentation for
instructions on how to do this.
*****
Problem 3: At resolutions of Super VGA 1024 X 768 and greater, the program gets
rearranged on the screen, i.e., the program window is bigger than the Convert 2.0
graphic picture, some of the icons might not appear correctly, etc.
Cause: This program is designed to run in resolution modes of Super VGA 800 X 640 and
lower.
Solution: Go to Win Setup and select a video driver that is compatible with
Convert 2.0, i.e., Super VGA 800 X 640, etc. See you Windows documentation for
instructions on how to do this.
*****
Problem 4: When loading Convert 2.0 you get the following message:
"The file 'C:\WINDOWS\SYSTEM\THREED.VBX' is out of date.
This program requires a newer version"
Cause: There are numerous versions of the THREED.VBX file. Many Windows load and use
routines found in Danamic Link Libraries(DLL) and Visual Basic Controls(VBX) and keep
these routines in memory. These routines are unique in that they can be shared by
more than one program. If a program is running that is using a different version of
the THREED.VBX file than is resident in the directory where the Convert program
resides then there may be conflicts.
Solution: Check your WINDOWS\SYSTEM directory for the THREED.VBX file. If there is a
later version of than the one residing in the Convert program's directory, then it
is safe to delete the THREED.VBX file in the Convert directory. At any rate, you
should have the latest version of THREED.VBX in your WINDOWS\SYSTEM directory.
If you are having any other problems with Convert 2.0 then see CUSTOMER SUPPORT below.
********* THE SHAREWARE CONCEPT **********
Shareware is copyrighted software that is distributed by authors through
bulletin boards, on-line services and disk vendors.
Shareware allows you to try the software for a reasonable limited
period. If you decide not to continue using it, you throw it away, (remove
it from your hard drive), and forget about it. You only pay for it if you
continue to use it. Shareware is a distribution method, not a type of
software. You benefit because you get to use the software to determine
whether it meets your needs, before you pay for it.
The shareware system and the continued availability of quality shareware
products depend on your willingness to register and pay for the shareware
you use. It's the the registration fees you pay which allow authors to
support and continue to develope our products. Please show your support
for shareware by registering those programs you actually use.
************* CUSTOMER SUPPORT *************
CompuServe: Michael Robertson, 71024,1562
Internet: mjrsoft@ix.netcom.com
Voice Phone: In USA only (714) 858-1843, leave name & number and brief
description of problem, someone will contact you as soon as
possible.
Snail Mail: MJR Software
22 Buckthorn
Rancho Santa Margarita, CA 92688
************** REGISTRATION ****************
CompuServe: GO SWREG Product #1829
Snail Mail: Send Check or Money Order in the amount of $10.00 to:
MJR Software
22 Buckthorn
Rancho Santa Margarita, CA 92688
If you wish to have a copy of Convert 2.0 on a 3╜ disk then,
send an extra $3.00, total $13.00.
$10.00 will get you a Registration Number that will eliminate those bothersome
NAG SCREENS.
Free Customer Support.
Notification of new releases.
Later upgrades offered at reduced prices.
************ SHAREWARE LICENSE AGREEMENT **************
This is an agreement between you (either an individual or an entity) and
MJR SOFTWARE. By using or distributing copies of the shareware
evaluation version of the CONVERT 2.0 package in any way, you are
agreeing to be bound by the terms of this agreement. If you do not
agree to the terms of this agreement, you must cease using or
distributing this software immediately.
1) LICENSE TO USE: You may use the shareware evaluation version of
CONVERT 2.0 for a period not to exceed thirty (30) days. If you wish to use
it beyond this period, you MUST REGISTER by making the necessary payment
to MJR SOFTWARE as outlined elsewhere in this package.
2) COPYRIGHT: CONVERT 2.0 is Copyright (c) 1993-1995 by MJR SOFTWARE
and is protected by United States copyright laws and international
treaty provisions. MJR SOFTWARE, as exclusive publisher, is an
authorized representative of the copyright holder. Except to the
extent expressly licensed, the copyright holder has and reserves
the exclusive copyright and other right, title, and interest to
copy and distribute this software, and the right to use the Trademark
"CONVERT" in connection with it.
3) NON-COMMERCIAL DISTRIBUTION: You are granted a license to copy and
distribute the shareware evaluation version of CONVERT 2.0 in a
non-commercial manner. Distribution is non-commercial if it is for
free, or by a hobby, user or computer interest group to its members, or
by any BBS, provided the CONVERT 2.0 package is not modified or
abridged in any way. MJR SOFTWARE reserves the right to revoke
this license at any time for any reason on 90 days advance written
notice. Commercial distributors should contact MJR Software for
information concerning distribution of CONVERT 2.0. See Customer Support
in this file or the CVT.HLP file for information on contacting
MJR Software.
4) THIS PACKAGE (CONSISTING OF THE CONVERT 2.0 SOFTWARE AND ASSOCIATED
FILES AND DOCUMENTATION) IS PROVIDED "AS IS" WITHOUT REPRESENTATION OR
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY REPRESENTATIONS OR ENDORSEMENTS REGARDING THE USE OF,
THE RESULTS OF, OR PERFORMANCE OF; ITS APPROPRIATENESS, ACCURACY,
RELIABILITY, OR CURRENTNESS. THE ENTIRE RISK AS TO THE USE OF THIS
PACKAGE IS ASSUMED BY THE USER. IN NO EVENT WILL MJR SOFTWARE BE
LIABLE FOR ANY DAMAGES, DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL,
RESULTING FROM ANY DEFECT IN THE PACKAGE, EVEN IF MJR SOFTWARE HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ANY AND ALL USE OF
THIS PACKAGE, FOR ANY PURPOSE, WITH NO REGARD TO THE LEGALITY OF SUCH
USE OR PURPOSE, IS THE COMPLETE AND SOLE RESPONSIBILITY OF THE USER.
Some states do not allow disclaimers of implied warranties or the
exclusion of consequential damages, so the above disclaimers and
exclusions may not apply to you.
5) GOVERNING LAW: This agreement is governed by the laws of the State
of California. Should any part or parts of this agreement be deemed
unlawful, the remainder shall continue to apply.
***** TRADEMARK ACKNOWLEDGEMENTS *****
--------------------------
"CONVERT" is a trademark of MJR SOFTWARE.
"Microsoft" is a registered trademark of Microsoft Corporation
"Windows" is a trademark of Microsoft Corporation
All other trademarks mentioned are the property of their
respective companies. No infringement is intended.
Thanks!